Advertisement
New Hardware Features in Cisco IOS Release 12.2(44)SQ1
Table 3
Cisco RFGW-10 DS-48 line card.
Table 3
Cisco IOS Release
Cisco IOS Release 12.2(44)SQ
Cisco IOS Release 12.2(44)SQ1 DS48 Board = 800-28096-02
Cisco IOS Release 12.2(44)SQ1 is backward compatible with the existing, released RFGW-10 DS-48
Note
UEQAM line cards (DS48 Board = 800-28096-01) and field-replaceable units (FRUs).
New Hardware Features in Cisco IOS Release 12.2(44)SQ
Cisco IOS Release 12.2(44)SQ coincides with the introduction of the Cisco Radio Frequency (RF)
Gateway 10 system. All released field-replaceable units (FRUs) are supported only by Cisco IOS
Release 12.2(44)SQ and the Cisco RFGW-10 platform.
Below is a high level summary of the supported hardware features of the Cisco RFGW-10.
Cisco RF Gateway 10 Universal Edge QAM Chassis
•
•
OL-18677-10
lists the Cisco IOS Release 12.2(44)SQ1 support for a minor board revision of the
Cisco RFGW-10 DS-48 line card Board and Upconverter
13 rack unit carrier-class chassis
19-inch rack-mount capability
–
4536-watt capacity
–
Front-to-rear airflow design
–
–
Integrated RF switching
–
Cable-once (wire-once) coaxial connections
–
LCD front panel display
240-Gbps system performance
–
System-level redundancy
–
Redundancy system architecture
All major FRUs redundant (Supervisor card, line card, PEM)
–
Dual-zone integrated RF data path switch
–
500-ms line card failover
–
Full software and hardware high availability support
–
External Gigabit Ethernet / 10-Gigabit Ethernet redundancy
–
DTI redundancy
–
System operation from single power supply
–
RFGW-10 DS-48 UEQAM Card
DS48 Board = 800-28096-01
Release Notes for Cisco RF Gateway 10 in Cisco IOS Release 12.2SQ
New and Changed Information
Internal DS48 Upconverter
DS48 Upconverter = 800-29408-01
DS48 Upconverter = 800-29408-02
7
Advertisement
