Download Print this page

Cisco RF Gateway 10 Release Notes page 34

Release notes in ios release 12.2sq
Hide thumbs Also See for RF Gateway 10:

Advertisement

Caveats
Caveat
CSCtu30476
CSCtu32163
CSCtw47308
CSCtw57111
CSCtw87166
CSCtx54967
CSCtx80384
Release Notes for Cisco RF Gateway 10 in Cisco IOS Release 12.2SQ
34
Description
Symptoms: The show facility-alarm status command output displays gibberish
output.
Conditions: This issue was observed when power supply redundancy was tested
on the Cisco RFGW-10 router.
Workaround: There is no workaround.
Symptoms: SSH not working after hostname and domain name change.
Conditions: This issue was first observed in Cisco IOS Release 12.2(50)SQ on the
Cisco RFGW-10 router.
Workaround: Execute redundancy force-switchover command on a redundant
Supervisor card.
Symptoms: On reloading the Cisco RFGW-10 the following message may be
seen:
%C4K_TRANSCEIVERMAN-3-S2WERROR: (Suppressed 1 times)S2w bus error
while looking for changed transceivers on port Gi12/13:
S2wErrorNoAckDevAddress
Conditions: This issue was observed when the Cisco RFGW-10 router was
reloaded.
Workaround: There is no workaround.
Symptoms: Incorrect bandwidth value is displayed at port level while executing
show interface qam command on the Cisco RFGW-10 router.
Conditions: This issue is seen on Cisco RFGW-10 DS-48 line card.
Workaround: There is no workaround.
Symptoms: Image upgrade errors are displayed on the Cisco RFGW-10 when
image is removed from the flash.
Conditions: This issue occurs while inserting the Cisco RFGW-10 DS-48 line
card on the router.
Workaround: There is no workaround. This is a cosmetic issue.
Symptoms: Duplicate traps are generated when a power supply unit is inserted
into a Cisco RFGW-10 router. The traps ciscoEnvMonSupplyState and
entConfigChange traps are duplicated.
Conditions: This issue is observed when a power supply unit is inserted into a
Cisco RFGW-10 router.
Workaround: There is no workaround.
Symptoms: DEPI sessions exist in the data plane after executing the no cable
mode depi remote learn command.
Conditions: This issue occurs when control plane is configured on the Cisco
RFGW-10 router.
Workaround: There is no workaround.
OL-18677-10

Advertisement

loading