Advertisement
Caveat
CSCud52179
CSCud65986
Open Caveats for Cisco IOS Release 12.2(50)SQ4
Caveat
CSCtr78519
OL-18677-10
Description
Symptoms: Line card redundancy group (LCRED) validation fails when
Cisco RFGW-10 DS-48 line card is configured first.
Conditions: This issue occurs with Cisco RFGW-10 DS-48 and
Cisco RFGW-10 DS-48-1G line cards. This issue occurs in 1: N LCRED group
with mixed line cards. The Cisco RFGW-10 DS-48 line card is configured first
and the secondary member validation prevents the backup for incompatible
reserve card.
Workaround: Configure the Cisco RFGW-10 DS-48 line card as the secondary
line card and perform a switchover from Cisco RFGW-10 DS-48-1G line card to
the Cisco RFGW-10 DS-48 line card.
Symptoms: Error messages are observed on the Cisco RFGW-10 router console.
RFGW-3-LINECARD_ERRMSG_ERR: SLOT 13:TCC_ERRMSG_GEN_LCD_BUSY_TIMEOUT
proc/boot/tcc_front_panel
%RFGW-3-LINECARD_ERRMSG_ERR: SLOT 13:TCC_ERRMSG_LCD_GEN_PRINT_FAILED
%RFGW-3-LINECARD_ERRMSG_ERR: SLOT 13:TCC_ERRMSG_GEN_LCD_BUSY_TIMEOUT
proc/boot/tcc_front_panel
%RFGW-3-LINECARD_ERRMSG_ERR: SLOT 13:TCC_ERRMSG_LCD_GEN_COMMAND_FAILED
Conditions: This issue occurs after a Supervisor card switchover is performed
using redundancy reload shelf command.
Workaround: There is no workaround. No functional impact is observed.
Description
Symptoms: The Cisco RFGW-10 DS-48 line cards reset due to a heartbeat failure.
Conditions: This issue occurs when the TCC card is reset by the Supervisor due
to heartbeat failure causing Cisco RFGW-10 DS-48 line cards to reset.
Workaround: Extend the TCC heartbeat timeout value. Else, try to re-seat the
TCC card.
Release Notes for Cisco RF Gateway 10 in Cisco IOS Release 12.2SQ
Caveats
37
Advertisement
