Advertisement
Caveats
Open Caveats for Cisco IOS Release 12.2(50)SQ3
Caveat
CSCtn96911
Resolved Caveats for Cisco IOS Releases 12.2(50)SQ3
Caveat
CSCtk63045
CSCtk97075
Release Notes for Cisco RF Gateway 10 in Cisco IOS Release 12.2SQ
40
Description
Symptoms: The following DEPI related error messages and tracebacks may be
displayed on the Cisco RFGW-10 when a N+ 1 line card switchover occurs on the
peer Cisco uBR10012 router.
Mar 23 15:17:54 CDT: %RFGW-3-LINECARD_ERRMSG_ERR: SLOT
6:MV_ERRMSG_DP_MSG_RECONFIG_SES: mv_depi: 1074135170 6/3.1
Mar 23 15:17:54 CDT: %RFGW-3-UNEXPECTED: Invalid response received for
CNFG DEPI SESSION message
-Traceback= 10D2FE20 10D3056C 108A11D0 108A29FC 1089C414 1089D9B0
106689A8 1065FB58
Mar 23 15:17:56 CDT: %RFGW-3-UNEXPECTED: Error updating state from LC
-Traceback= 10D2FE20 10D3056C 108A1BBC 1089F40C 1089CABC 1089D9BC
106689A8 1065FB58
Conditions: This issue occurs on the Cisco RFGW-10 connected to a Cisco
uBR10012 router with Cisco uBR-MC3GX60V line cards. This issue was
observed when DEPI Path Redundancy (DPR) feature was configured, and N+1
line card switchover occurred on the Cisco uBR10012 router.
Workaround: The "%RFGW-3-UNEXPECTED: Error updating state from LC"
traceback may be suppressed if M-CMTS statistics collection is disabled using
the no depi eqam-stats command.
There is no workaround for the "%RFGW-3-LINECARD_ERRMSG_ERR:
SLOT 6:MV_ERRMSG_DP_MSG_RECONFIG_SES" error message and
"%RFGW-3-UNEXPECTED: Invalid response received for CNFG DEPI
SESSION message" traceback.
Description
Symptoms: After Supervisor switchover, "No such session" messages are seen in
the newly active Supervisor. This does not affect the performance of the system.
Conditions: This issue occurs when the Supervisor is configured in stateful
switchover (SSO) redundancy mode, the DEPI control plane protocol is in use
instead of DEPI manual, and the Supervisor switchover CLI (redundancy force
switchover) is executed.
Workaround: There is no workaround.
Symptoms: Traceback is observed on the new active Supervisor after Supervisor
switchover. This does not affect the performance of the system.
Conditions: This issue occurs when DEPI control plane is configured, the Cisco
RFGW-10 is in stateful switchover (SSO) mode, and the line card
high-availability is not configured on both the Cisco CMTS and Cisco RFGW-10.
Workaround: There is no workaround.
OL-18677-10
Advertisement
