Advertisement
Caveat
CSCtg22801
CSCtg63326
CSCtg76204
CSCth00685
CSCth29058
CSCth41923
OL-18677-10
Description
Symptoms: When the SCTE-HMS-QAM-MIB object is queried, the
"rfQamChannelUtilization" value is always zero for the Video QAM and the
"rfQamChannelOutputBw" value is truncated.
Conditions: This issue occurs when the "rfQamChannelUtilization" and
"rfQamChannelOutputBw" values of the SCTE-HMS-QAM-MIB object are
queried.
Workaround: There is no workaround.
Symptoms: The Cisco RFGW-10 DS-48 line card generates the error message:
LC_ERRMSG_VIDEO_PSI_SECTION_ALLOC_FAILED
Conditions: This issue occurs when video streams contain private program-specific
information (PSI).
Workaround: Remove the private PSI.
Symptoms: The ifIndex field in the entAliasMappingTable for the QAM
subinterface is not current.
Conditions: This issue occurs when the Cisco RFGW-10 DS-48 line card is added
or removed, or a line card switchover is performed on the Cisco RFGW-10 chassis.
Workaround: There is no workaround.
Symptoms: Incorrect bandwidth information is displayed in the GUI of the
Cisco RFGW-10.
Conditions: This issue occurs when the Cisco RFGW-10 is configured with more
than one line cards and an attempt is made to view the bandwidth information of
these line cards.
Workaround: Click the Session radio button to view the bandwidth information for
all line cards.
Symptoms: The Layer 3 pings from the Cisco uBR10012 router to the cable
modems in w-online state fail. The payload of NULL packets from the
Cisco RFGW-10 DS-48 RF port are zeroes, instead of a Pseudo Random Bit
Sequence (PRBS).
Conditions: This issue occurs when the RF port on the Cisco RFGW-10 DS-48 line
card is in "rf-shut" state.
Workaround: Configure the RF port on the Cisco RFGW-10 DS-48 line card to "no
rf-shut" state. If the RF port is not in use, then it is recommended that you do not
connect the RF port to the RF plant.
Symptoms: The following error messages are seen on the Cisco RFGW-10:
%RFGW-3-LINECARD_ERRMSG_ERR: SLOT
4:LC_ERRMSG_VIDEO_PSI_SECTION_ALLOC_FAILED Snoop, id -1
Conditions: This issue occurs after many video sessions transition from "ACTIVE"
to "OFF".
Workaround: There is no workaround.
Release Notes for Cisco RF Gateway 10 in Cisco IOS Release 12.2SQ
Caveats
45
Advertisement
