Advertisement
Based on the Cisco IOS networking software, the Cisco RFGW-10 supports advanced switching and
routing features. The platform supports full upgradeability, ensuring investment protection as software
enhancements and industry standards continue to evolve.
System Requirements
This section describes the system requirements for Cisco IOS Release 12.2SQ series and includes the
following sections:
•
•
•
•
Hardware Supported
Table 1
Table 1
Cisco RFGW Chassis
RFGW-10
Cisco RFGW Series Supervisors
RFGW-X4516-10GE
RFGW-X4516-10GE=
Cisco RFGW Series TCC Cards
RFGW-TCC1
RFGW-TCC1=
Cisco RFGW Series Line Cards
RFGW-DS48
RFGW-DS48=
RFGW-DS48-1G
Cisco RFGW Series RF Switch Cards
RFGW-10-RFSW1=
Cisco RFGW Series PEM Options
RFGW-10-PWR-DC
RFGW-10-PWR-DC1=
Cisco RFGW Series Supervisor Memory Options
MEM-C4K-FLD128M
MEM-C4K-FLD128M= Catalyst 4500 IOS-based Supervisor, CompactFlash, 128 MB spare.
OL-18677-10
Hardware Supported, page 3
Software Compatibility, page 4
Determining the Software Version, page 4
Feature Set Tables, page 5
provides information on the hardware supported on the Cisco RFGW-10.
Hardware Supported on the Cisco RFGW-10
Chassis with the following slots: 2 Supervisor, 10 RF line card, two TCC,
and 12 RFGW-10-RFSW (RF switch card) slots. Also includes the
RFGW-10 fan tray assembly and front panel display (FPD).
RFGW Supervisor V-10GE, 2x10GE (X2) and 4x1GE (SFP).
RFGW Supervisor V-10GE, 2x10GE (X2) and 4x1GE (SFP) spare.
RFGW timing, communication, and control card v1.
RFGW timing, communication, and control card v1 spare.
RFGW universal downstream EQAM card, 12 RF ports, 48 QAMs.
RFGW universal downstream EQAM card, 12 RF ports, 48 QAMs spare.
RFGW universal downstream EQAM card, 12 RF ports, 48 QAMs.
RFGW RF switch v1 spare.
RFGW DC PEM with monitoring v1a.
RFGW DC PEM with monitoring v1 spare.
Catalyst 4500 IOS-based Supervisor, CompactFlash, 128 MB.
Release Notes for Cisco RF Gateway 10 in Cisco IOS Release 12.2SQ
System Requirements
3
Advertisement
