Advertisement
New and Changed Information
New and Changed Information
These sections list the new and existing hardware and software features supported by the
Cisco RFGW-10.
New Hardware Features in Cisco IOS Release 12.2(50)SQ6
There are no new hardware features supported in the Cisco IOS Release 12.2(50)SQ6.
New Hardware Features in Cisco IOS Release 12.2(50)SQ5
There are no new hardware features supported in the Cisco IOS Release 12.2(50)SQ5.
New Hardware Features in Cisco IOS Release 12.2(50)SQ4
There are no new hardware features supported in the Cisco IOS Release 12.2(50)SQ4.
New Hardware Features in Cisco IOS Release 12.2(50)SQ3
There are no new hardware features supported in the Cisco IOS Release 12.2(50)SQ3.
New Hardware Features in Cisco IOS Release 12.2(50)SQ2
There are no new hardware features supported in the Cisco IOS Release 12.2(50)SQ2.
New Hardware Features in Cisco IOS Release 12.2(50)SQ1
Cisco IOS Release 12.2(50)SQ1 introduces the Cisco RFGW-DS48-1G line card. The
Cisco RFGW-DS48-1G line card has similar features as the RFGW-DS48 line card, however it supports
full DOCSIS DRFI compliance up to an operating frequency of 1GHz. The operating bandwidth of the
Cisco RFGW-DS48-1G line card is 88 MHz to 1GHz. The Cisco RFGW-DS48-1G resolves the noise
floor and spurious emission limitations of the Cisco RFGW-DS48 line card, which was not compliant
with the DRFI technical specifications. For more information on the RFGW- DS-48 line card, see
RFGW-10 DS-48 Universal EQAM Line Card, page
New Hardware Features in Cisco IOS Release 12.2(50)SQ
There are no new hardware features supported in the Cisco IOS Release 12.2(50)SQ.
New Hardware Features in Cisco IOS Release 12.2(44)SQ2
There are no new hardware features supported in the Cisco IOS Release 12.2(44)SQ2.
Release Notes for Cisco RF Gateway 10 in Cisco IOS Release 12.2SQ
6
8.
Cisco
OL-18677-10
Advertisement
