The Telnet Screen; Figure 109 Advanced > Remote Management > Telnet; Table 70 Advanced > Remote Management > Www - ZyXEL Communications P-793H User Manual

Chapter 17 Remote Management
The following table describes the labels in this screen.
Table 70 Advanced > Remote Management > WWW
LABEL
Port
Access Status
Secured Client
IP
Apply
Cancel

17.3 The Telnet Screen

You can use Telnet to access the P-793H v2's command line interface. Specify
which interfaces allow Telnet access and from which IP address the access can
come.
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 109 Advanced > Remote Management > Telnet
242
DESCRIPTION
You may change the server port number for a service, if needed.
However, you must use the same port number in order to use that
service for remote management.
Select the interface(s) through which a computer may access the P-
793H v2 using this service.
A secured client is a "trusted" computer that is allowed to communicate
with the P-793H v2 using this service.
Select All to allow any computer to access the P-793H v2 using this
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the P-793H v2 using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
P-793H v2 User's Guide