Table 97 Syslog Logs - ZyXEL Communications P-793H User Manual

Table 96 ICMP Notes (continued)
TYPE CODE
4
0
5
0
1
2
3
8
0
11
0
1
12
0
13
0
14
0
15
0
16
0

Table 97 Syslog Logs

LOG MESSAGE
<Facility*8 + Severity>Mon dd
hr:mm:ss hostname
src="<srcIP:srcPort>"
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"
devID="<mac address last three
numbers>" cat="<category>
P-793H v2 User's Guide
DESCRIPTION
Source Quench
A gateway may discard internet datagrams if it does not have the
buffer space needed to queue the datagrams for output to the next
network on the route to the destination network.
Redirect
Redirect datagrams for the Network
Redirect datagrams for the Host
Redirect datagrams for the Type of Service and Network
Redirect datagrams for the Type of Service and Host
Echo
Echo message
Time Exceeded
Time to live exceeded in transit
Fragment reassembly time exceeded
Parameter Problem
Pointer indicates the error
Timestamp
Timestamp request message
Timestamp Reply
Timestamp reply message
Information Request
Information request message
Information Reply
Information reply message
DESCRIPTION
"This message is sent by the system ("RAS"
displays as the system name if you haven't
configured one) when the router generates a
syslog. The facility is defined in the web MAIN
MENU->LOGS->Log Settings page. The severity is
the log's syslog class. The definition of messages
and notes are defined in the various log charts
throughout this appendix. The "devID" is the last
three characters of the MAC address of the router's
LAN port. The "cat" is the same as the category in
the router's logs.
Chapter 20 Logs
281