Chapter 23 Introducing the SMT
Note: Use menu 23.1 to change the password.
Figure 138 SMT Main Menu
Getting Started
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
Note: There is an inactivity timeout, and the default value is ten minutes. If there is no
activity for longer than this, your P-793H v2 will automatically log you out. You
will then have to telnet into the P-793H v2 again. You can use the web
configurator or the CI commands (menu 24.8) to change the inactivity timeout
period.
23.2 SMT Menu Items
The following table provides an overview of each menu item.
Table 106 Main Menu Summary
MENU
1 General Setup
2 WAN Setup
3 LAN Setup
4 Internet Access
Setup
302
Copyright (c) 1994 - 2009 ZyXEL Communications Corp.
P-793H v2 Main Menu
Enter Menu Selection Number:
FUNCTION
Use this menu to set up device mode, dynamic DNS and
administrative information.
Use this menu to configure the DSL connection, and traffic
redirect interface.
Use this to apply LAN filters, configure LAN DHCP and TCP/IP
settings, and to allow or block layer-2 traffic between each pair of
ports.
Use this menu to configure your Internet connection.
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
26. Schedule Setup
99. Exit
P-793H v2 User's Guide