ZyXEL Communications P-793H User Manual page 47

G.shdsl.bis bonded broadband gateway
Hide thumbs Also See for P-793H:
Table of Contents

Advertisement

Table 3 Navigation Panel Summary
LINK
LAN
NAT
Security
Firewall
Content Filter
Packet Filter
VPN
Certificates
Advanced
P-793H v2 User's Guide
TAB
FUNCTION
IP
Use this screen to configure LAN TCP/IP settings and
other advanced properties.
DHCP Setup
Use this screen to configure LAN DHCP settings.
Client List
Use this screen to view current DHCP client information
and to always assign specific IP addresses to individual
MAC addresses (and host names).
IP Alias
Use this screen to partition your LAN interface into
subnets.
General
Use this screen to enable NAT.
Port Forwarding
Use this screen to make your local servers visible to
the outside world.
This screen appears when you choose SUA Only from
the NAT > General screen.
Address
Use this screen to configure network address
Mapping
translation mapping rules.
This screen appears when you choose Full Feature
from the NAT > General screen.
ALG
Use this screen to enable or disable SIP ALG.
General
Use this screen to activate/deactivate the firewall and
the default action to take on network traffic going in
specific directions.
Rules
This screen shows a summary of the firewall rules, and
allows you to edit/add a firewall rule.
Threshold
Use this screen to configure the thresholds for
determining when to drop sessions that do not become
fully established.
Keyword
Use this screen to block access to web sites containing
certain keywords in the URL.
Schedule
Use this screen to set the days and times for the P-
793H v2 to perform content filtering.
Trusted
Use this screen to exclude a range of users on the LAN
from content filtering on your P-793H v2.
Packet Filter
Use this screen to configure the rules for protocol and
generic filter sets.
Setup
Use this screen to configure each VPN tunnel.
Monitor
Use this screen to look at the current status of each
VPN tunnel.
VPN Global
Use this screen to allow NetBIOS traffic through VPN
Setting
tunnels.
Trusted CAs
Use this screen to import CA certificates to the P-793H
v2.
Chapter 2 Introducing the Web Configurator
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-793h v2

Table of Contents