Tutorials; Chapter 5 Tutorials; Overview; Configuring Point-To-Point Connection - ZyXEL Communications P-793H User Manual

C
H A P T E R

5.1 Overview

This chapter describes:
• Configuring Point-to-point
• Configuring a Point-to-2points
Note: The tutorials featured in this chapter require a basic understanding of
connecting to and using the Web Configurator on your P-793H v2. For details,
see the included Quick Start Guide. For field descriptions of individual screens,
see the related technical reference in this User's Guide.

5.2 Configuring Point-to-point Connection

In this scenario, Company A wants to set up a point-to-point connection with its
branch office B by using two P-793H v2s. The two P-793H v2s are directly
connected together through their DSL ports. The P-793H v2 on A's side is the
server and the P-793H v2 on B's side is the client. The maximum transfer rate for
the DSL connection between A and B is 5696 Kbps and the minimum transfer rate
is 3200 Kbps.
To set up the point-to-point connection between A and B, you need to:
Set Up the Server.
1
P-793H v2 User's Guide
Connection, see
Connection, see
5696/3200 Kpbs
A

Tutorials

page 67
page 70
B
5
67