Table 107 Smt Menus Overview - ZyXEL Communications P-793H User Manual

Table 106 Main Menu Summary
MENU
11 Remote Node
Setup
12 Static Routing
Setup
15 NAT Setup
21 Filter and Firewall
Setup
22 SNMP
Configuration
23 System Password
24 System
Maintenance
26 Schedule Setup
99 Exit
The following table gives you an overview of the various SMT menus.

Table 107 SMT Menus Overview

MENUS SUB MENUS
1 General Setup 1.1 Configure Dynamic
DNS
2 WAN Setup 2.1 Traffic Redirect Setup
3 LAN Setup 3.1 LAN Port Filter Setup
3.2 TCP/IP and DHCP
Setup
4 Internet Access
Setup
11 Remote Node 11.1 Remote Node Profile
Setup
12 Static Route 12.1 IP Static Route Setup 12.1.1 Edit IP Static
Setup
12.3 Bridge Static Route
Setup
15 NAT Setup 15.1 Address Mapping Sets 15.1.x Address Mapping
15.2 NAT Server Sets
P-793H v2 User's Guide
FUNCTION
Use this menu to configure detailed remote node settings (for
example, your ISP is a remote node) as well as apply filters.
Use this menu to configure IP and bridge (MAC) static routes.
Use this menu to configure Network Address Translation (NAT) on
the P-793H v2.
Use this menu to configure filters and to activate or deactivate the
firewall.
Use this menu to configure SNMP.
Use this menu to change your password.
Use this menu for comprehensive system maintenance, from
looking at the system status to uploading firmware. You can also
access the Command Interface (CI).
Use this menu to configure schedule sets.
Use this menu to exit the SMT.
3.2.1 IP Alias Setup
11.1.3 Remote Node
Network Layer Options
11.1.5 Remote Node Filter
11.1.6 Remote Node ATM
Layer Options
Route
12.3.1 Edit Bridge Static
Route
Rules
15.2.x NAT Server Setup
Chapter 23 Introducing the SMT
15.1.x.x Address
Mapping Rule
303