Agilent Technologies 7000B Series User Manual page 408

19 Reference
Table 11
Model
N2881A
N2882A
W2637A
W2638A
W2639A
N5450A
N2791A
N2792A
N2793A
1156A
1144A
1145A
1130A
N2772A
1141A
1146A
1147A
N2780A
N2781A
N2782A
N2783A
408
Accessories Available for 7000B Series Oscilloscopes (continued)
Description
InfiniiMax DC blocking caps (qty 2), withstand up to 30 V DC, to be used with
InfiniiMax probe amplifiers and heads
75 ohm-to-50 ohm adapter, DC to 8 GHz bandwidth, 5.7 dB attenuation
LPDDR BGA probe, x16, 404 MHz, 100 ohm input impedance
LPDDR BGA probe, x32, 404 MHz , 100 ohm input impedance
Oscilloscope Adapter Board, 1.5 GHz, 75 ohm input impedance
InfiniiMax Extreme Temperature Extension Cables, to be used with InfiniiMax
probe amplifiers and heads, 92 cm (36 in)
Differential probe, 1 MOhm termination, 10:1 or 100:1 (switchable), 25 MHz
Differential probe, 50 Ohm termination, 10:1, 200 MHz, compatible with all
InfiniiVision 7000B Series models
Differential probe, 50 Ohm termination, 10:1, 800 MHz, compatible with all
InfiniiVision 7000B Series models
Active Probe, 1.5 GHz
Active Probe, 800 MHz (requires 1142A – power supply)
†
Active Probe, 750 MHz 2-ch (requires 1142A – power supply)
†
For active differential probes: 1.5 GHz InfiniiMax amplifier (requires one or more
InfiniiMax probe head – E2675A, E2668A, E2669A).
Active Differential Probe, 20 MHz, 1.2 kVDC + peak AC max (requires N2773A
power supply)
Active Differential Probe, 200 MHz, 200 VDC + peak AC max (requires 1142A
power supply)
Current Probe, 100 kHz, 100 A, AC/DC
†
Current Probe, 50 MHz, 30 A, AC/DC with AutoProbe interface
Current Probe, 2 MHz, 500 A, AC/DC (use with N2779A power supply)
Current Probe, 10 MHz, 150 A, AC/DC (use with N2779A power supply)
Current Probe, 50 MHz, 30 A, AC/DC (use with N2779A power supply)
Current Probe, 100 MHz, 30 A, AC/DC (use with N2779A power supply)
InfiniiVision 7000B Series Oscilloscopes User's Guide