Using The Horizontal Controls - Agilent Technologies 7000B Series User Manual

3 Displaying Waveforms

Using the Horizontal Controls

The horizontal controls include:
• The horizontal scale and position knobs.
• The [Horiz] key for accessing the Horizontal Menu.
• The
• The [Search] key for marking events in the serial decode Lister. See
• The [Navigate] keys for navigating time, marked events in the serial
The following figure shows the Horizontal Menu which appears after
pressing the [Horiz] key.
XY or Roll
mode
The Horizontal Menu lets you select the time mode (Normal, XY, or Roll),
enable Zoom, set the time base fine control (vernier), and specify the time
reference.
The current sample rate is displayed above the Fine and Time Ref softkeys.
62
zoom key for quickly enabling/disabling the split- screen zoom
display.
"Searching Lister Data"
decode Lister, and segmented memory acquisitions.
Trigger
point
Normal Zoom sweep
sweep mode
mode
on page 259.
Time
Delay
reference time
Sample
rate
InfiniiVision 7000B Series Oscilloscopes User's Guide
Sweep Trigger Trigger level
source or threshold
speed
Time
Fine control
reference