Triggering on FlexRay Events
1 Press [Trigger]; then, select the FlexRay trigger type.
2 In the Trigger Menu press Trigger; then, select Event.
3 Press Event; then, select the event type:
4 Press Auto Setup for Event.
InfiniiVision 7000B Series Oscilloscopes User's Guide
•
Wake-up
•
TSS - Transmission Start Sequence
•
BSS - ByteStart Sequence
•
FES/DTS - Frame End or Dynamic Trailing Sequence
This automatically configures oscilloscope settings (as shown on the
display) for the selected event trigger.
FlexRay Triggering and Serial Decode
13
317