To Disable/Enable Transparent Backgrounds; To Load The Default Label Library; To Specify The Measurement Window For Zoom Mode - Agilent Technologies 7000B Series User Manual

18 Oscilloscope Utility Settings
To preserve the acquisition mode during autoscale
The acquisition mode is normally switched to Normal when [AutoScale] is
performed. However, you can tell it to leave the acquisition mode
unchanged.
1 Press [Utility] > Options > Preferences > AutoScale.
2 In the AutoScale Preferences Menu, press Acq Mode; then select:

To disable/enable transparent backgrounds

There is a preference setting for whether measurements, statistics, and
other text displays have transparent or solid backgrounds.
1 Press [Utility] > Options > Preferences > More.
2 Press Transparent to toggle between transparent and solid text display

To load the default label library

See

To specify the measurement window for Zoom mode

When the zoomed time base is displayed, you can specify whether the
upper, Main window or the lower, Zoom window is used as the
measurement window.
1 Press [Utility] > Options > Preferences > More.
2 Press Window to select from these measurement window options:
386
Normal — to make the oscilloscope switch to Normal acquisition mode
•
whenever the [AutoScale] key is pressed. This is the default mode.
Preserve — to make the oscilloscope remain in the acquisition mode
•
you have chosen when the [AutoScale] key is pressed.
backgrounds.
"To reset the label library to the factory default"
Auto Select – The measurement is attempted in the lower, Zoom
•
window; if it cannot be made there, the upper, Main window is used.
InfiniiVision 7000B Series Oscilloscopes User's Guide
on page 93.