Agilent Technologies 7000B Series User Manual page 124

4 Triggering
Nth Edge Burst trigger set up consists of selecting the source, the slope of
the edge, the idle time, and the number of the edge:
1 Press the [Trigger] key in the Trigger section of the front panel, rotate
2 Press the Slope softkey to specify the slope of the edge.
3 Press the Idle softkey; then, turn the Entry knob to specify the idle
4 Press the Edge softkey; then, turn the Entry knob to which edge to
124
the Entry knob until Nth Edge Burst is displayed in the Trigger softkey.
Assign
channels
time.
trigger on.
Currently selected Clock,
Framing, or Data channel
Nth Edge Burst trigger
Idle time
Slope of
select
edge
InfiniiVision 7000B Series Oscilloscopes User's Guide
Trigger level
or threshold
Nth edge
select