• Data and Checksum — (LIN 2.0 only).
• Errors — highlighted in red.
Searching for LIN Data in the Lister
The oscilloscope's search capability lets you search for (and mark) certain
types of LIN data in the Lister. You can use the [Navigate] key and
controls to navigate through the marked rows.
1 With LIN selected as the serial decode mode, press [Search].
2 In the Search Menu, press Search for; then, select from these options:
For more information on searching data, see
page 259.
For more information on using the [Navigate] key and controls, see
navigate the time base"
InfiniiVision 7000B Series Oscilloscopes User's Guide
ID — Finds frames with the specified ID. Press the Frame ID softkey
•
to select the ID.
ID & Data — Finds frames with the specified ID and data. Press the
•
Frame ID softkey to select the ID. Press the Bits softkey to enter the
data value.
Errors — Finds all errors.
•
CAN/LIN Triggering and Serial Decode
on page 74.
"Searching Lister Data"
10
on
"To
279