Agilent Technologies 7000B Series User Manual page 248

7000b series

Hide thumbs Also See for 7000B Series:

Table of Contents

Web Interface

If you get the "Unable to connect to the instrument. You may need to

set the instrument's controller type to LAN." message:

a On the oscilloscope's front panel, press [Utility] > I/O.

b In the I/O Menu, press Control.

c Use the Entry knob to point to LAN; then, press Control again to

enable the LAN controller type.

Multiple controller types may be enabled.

InfiniiVision 7000B Series Oscilloscopes User's Guide