Configuring The [Quick Action] Key - Agilent Technologies 7000B Series User Manual

18 Oscilloscope Utility Settings

Configuring the [Quick Action] Key

The [Quick Action] key lets you perform common, repetitive actions by
pressing a single key.
To configure the [Quick Action] key:
1 Press [Utility] > Quick Action > Action; then, select the action that should be
Once the [Quick Action] key is configured, you simply press it to perform
the selected action.
382
performed:
Off — disables the [Quick Action] key.
•
Quick Print — prints the current screen image. Press Settings to set up
•
the printing options. See
Quick Save — saves setups, screen images, or data. Press Settings to set
•
up the save options. See
Quick Recall — recalls setups, traces, or masks. Press Settings to set up
•
the recall options. See
Quick Freeze Display — freezes the display without stopping acquisitions.
•
For more information, see
"Printing Screens"
"Saving and Recalling Data"
"Saving and Recalling Data"
"To freeze the display"
InfiniiVision 7000B Series Oscilloscopes User's Guide
on page 220.
on page 206.
on page 206.
on page 87.