13
FlexRay Triggering and Serial Decode
FlexRay Serial Decode
To set up the oscilloscope to capture FlexRay signals, see
FlexRay Signals"
While decoding FlexRay data, you can use FlexRay trigger or another trigger type, such as
N O T E
duration, I
When the oscilloscope is in FlexRay trigger mode, only FlexRay decode is available.
For FlexRay triggering setup see
N O T E
To set up FlexRay serial decode:
1 Press [Serial]; then, select the FlexRay serial decode mode.
2 If the decode line does not appear on the display, press the [Serial] key
3 If the oscilloscope is stopped, press the [Run/Stop] key to acquire and
You can use the Zoom horizontal sweep mode for easier navigation of the
decoded data.
318
on page 314.
2
C, Nth edge burst, sequence, SPI, or USB.
to turn it on.
decode data.
"FlexRay Triggering"
on page 315.
InfiniiVision 7000B Series Oscilloscopes User's Guide
"Setup for