Saving And Recalling Data; Selecting A Destination For Your Saved Data; Table 5 Saving Oscilloscope Data - Agilent Technologies 7000B Series User Manual

6 Saving, Recalling, and Printing

Saving and Recalling Data

Here are a few points about saving oscilloscope data:
• You can save a waveform trace and recall it later. The recalled trace
• You can save oscilloscope setup parameters and recall them later. The
• There is a distinction between print and save: print always refers to
The following table shows types of data and where the data can be saved.
Table 5
Type of Data
Oscilloscope setup and waveform trace
Display image and waveform data files
(BMP, PNG, CSV, ASCII XY, ALB, BIN)
*If Secure Environment Mode option is installed then data is prevented from being
You can also save the oscilloscope's display image using a web browser. See
N O T E
Image"

Selecting a Destination for Your Saved Data

Press [Save/Recall] > Save to access the Save Menu and select a destination
for saving your data.
206
appears in cyan (blue).
setup file stores settings such as horizontal timebase, vertical
sensitivity, trigger mode, trigger level, measurements, cursors, and math
functions. This lets you easily and consistently set up the oscilloscope
to make a particular measurement.
printing the display to a printer. Save means saving data to a USB mass
storage device or the oscilloscope's internal memory.
Saving Oscilloscope Data
stored in the oscilloscope's internal memory.
on page 250 for details.
Can be saved to:
USB device Oscilloscope's
internal memory
Yes Yes*
Yes No
InfiniiVision 7000B Series Oscilloscopes User's Guide
"Get