Servicing Cmp/Memory Modules; Cmp/Memory Modules Overview - Fujitsu SPARC Enterprise T5440 Service Manual

Servicing CMP/Memory Modules

This topic includes the following:
"CMP/Memory Modules Overview" on page 102
■
"Remove a CMP/Memory Module" on page 104
■
"Install a CMP/Memory Module" on page 105
■
"Add a CMP/Memory Module" on page 105
■
"CMP and Memory Module Device Identifiers" on page 107
■
"Supported CMP/Memory Module Configurations" on page 107
■

CMP/Memory Modules Overview

Up to four CMP/memory modules can be installed in the system. Each CMP module
is paired with a memory module. CMP modules and memory modules are keyed
uniquely to prevent incorrect insertion into the wrong type of slot.
A faulty CMP or memory module is indicated with an alluminated fault LED. An
alluminated module LED also might indicate a faulty FB-DIMM on that module.
102 SPARC Enterprise T5440 Server Service Manual • June 2011