Reconfigure The I/O And Pcie Fabric - Fujitsu SPARC Enterprise T5440 Service Manual

▼ Reconfigure the I/O and PCIe Fabric

The reconfig.pl script reconfigures the PCIe fabric to reconnect the PCIe slots and
onboard devices to the CMP nodes as efficiently as possible. The reconfig.pl
script also reconfigures the Solaris device names to match the new connections
between the CMP modules and the PCIe devices and slots. Use the reconfig.pl
script to reattach each PCIe slot and onboard device to its nearest available CMP
module.
To use the reconfig.pl, you must have the following:
Solaris OS JumpStart server
■
Net install image
■
The reconfig.pl script
■
Do the following:
1. Download the reconfig.pl script.
The reconfig.pl script is included in Patch ID 10264587.
2. Copy the reconfig.pl script to the root directory of the "miniroot" of the
netinstall image. This is the Solaris_10/Tools/Boot directory of your
exported Solaris 10 8/07, Solaris 10 5/08, or Solaris 10 10/08 OS image on your
JumpStart server.
3. Power off the system.
4. Log in to the ALOM compatibility shell. Type:
sc> setsc sys_ioreconfigure nextboot
5. Power on the system.
6. Boot from the network. Type:
ok boot net -s
7. Mount the system boot disk under the /mnt directory. Type:
# mount /dev/dsk/c0t0d0s0 /mnt
8. Change to the root directory of your boot disk and copy the reconfig.pl script
to the root of the boot disk. Type:
# cd /mnt
Performing Node Reconfiguration 163