Install A Fan Tray; Fan Tray Device Identifiers - Fujitsu SPARC Enterprise T5440 Service Manual

▼ Install a Fan Tray

1. Slide each fan tray into its bay until it locks into place.
Ensure that the fan tray is oriented correctly. Airflow in the system is from front to
back.
2. Verify proper fan tray operation.
See
Next Steps
If you are replacing the fan trays after performing another service procedure,
complete these steps.
"Slide the Server Into the Rack" on page 155
■
"Power On the Server" on page 157
■

Fan Tray Device Identifiers

These are the FRU device names for the fan trays in the server.
Device
FT0
FT1
FT2
FT3
Related Information
"Managing Faults" on page 11
■
"Hot-Pluggable and Hot-Swappable Devices" on page 75
■
"Fan Tray Fault LED" on page 89
■
88 SPARC Enterprise T5440 Server Service Manual • June 2011
"Fan Tray Fault LED" on page
Device Identifier
/SYS/MB/FT0
/SYS/MB/FT1
/SYS/MB/FT2
/SYS/MB/FT3
89.