Install The Fan Tray Carriage - Fujitsu SPARC Enterprise T5440 Service Manual
Fujitsu server user manual
Hide thumbs
Also See for SPARC Enterprise T5440:
- Service manual (214 pages) ,
- User manual (92 pages) ,
- Installation and setup manual (84 pages)
Table of Contents
Advertisement
"Remove a CMP/Memory Module" on page 104
■
Note – You must remove all CPU modules and memory modules from the system.
Do the following:
1. Remove the nine No. 1 Phillips screws securing the fan tray carriage to the top
of the chassis.
2. Loosen the seven captive No. 2 Phillips securing the bottom of the fan tray
carriage to the motherboard assembly.
3. Lift the fan tray carriage up and out of the system.
▼ Install the Fan Tray Carriage
1. Lower the fan tray carriage into the system.
134
SPARC Enterprise T5440 Server Service Manual • June 2011
Advertisement
Table of Contents
