Start The Oracle Vts Browser Environment - Fujitsu SPARC Enterprise T5440 Service Manual

If the Oracle VTS software is not installed, you see an error message for each
■
missing package, as in
See "Oracle VTS Overview" on page 21
packages.
2. If the Oracle VTS software is not installed, you can obtain the installation
packages from the following places:
Oracle Solaris Operating System DVDs
■
Download from the web. Refer to the Preface for information on how to access
■
the web site.
show Command Output
EXAMPLE:
ERROR: information for "SUNWvts" was not found
ERROR: information for "SUNWvtsr" was not found
...

▼ Start the Oracle VTS Browser Environment

For information about test options and prerequisites, refer to the Oracle VTS 7.0
User's Guide.
Note – Oracle VTS software can be run in several modes. You must perform this
procedure using the default mode.
1. Start the Oracle VTS agent and Javabridge on the server.
# cd /usr/Oracle VTS/bin
# ./startOracle VTS
2. At the interface prompt, choose C to start the Oracle VTS client.
3. Start the Oracle VTS browser environment from a web browser on the client
system. Type https://server-name:6789.
The Oracle VTS browser environment is displayed.
EXAMPLE: show Command Output on page
for a list of required Oracle VTS software
43.
Managing Faults 43