Powering Off The System; Power Off (Command Line) - Fujitsu SPARC Enterprise T5440 Service Manual

Properties:
type = Host System
keyswitch_state = Normal
product_name = T5440
product_serial_number = 0723BBC006
fault_state = OK
clear_fault_action = (none)
power_state = On
Commands:
cd
reset
set
show
start
stop

Powering Off the System

Note – Additional information about powering off the system is located in the
SPARC Enterprise T5440 Server Administration Guide.
This topic includes the following:
"Power Off (Command Line)" on page 67
■
"Power Off (Graceful Shutdown)" on page 68
■
"Power Off (Emergency Shutdown)" on page 68
■
"Disconnect Power Cords From the Server" on page 68
■

▼ Power Off (Command Line)

1. Shut down the Solaris OS.
At the Solaris prompt, type:
# shutdown -g0 -i0 -y
# svc.startd: The system is coming down. Please wait.
svc.startd: 91 system services are now being stopped.
Jun 12 19:46:57 wgs41-58 syslogd: going down on signal 15
Preparing to Service the System 67