Fujitsu SPARC Enterprise T5440 Service Manual page 66

4. (Optional) Select the test categories you want to run.
Certain test categories are enabled by default. You can choose to accept these.
Note –
run on this server.
5. (Optional) Customize individual tests.
Click on the name of the test to select and customize individual tests.
Tip – Use the System Excerciser – High Stress Mode to test system operations. Use
the Component Stress – High setting for the highest stress possible.
6. Start testing.
Click the Start Tests button. Status and error messages appear in the test messages
area located across the bottom of the window. You can stop testing at any time by
clicking the Stop button.
During testing, the Oracle VTS software logs all status and error messages. To
view these messages, click the Logs tab. You can choose to view the following
logs:
■
44 SPARC Enterprise T5440 Server Service Manual • June 2011
Oracle VTS Tests on page 46
Test Error – Detailed error messages from individual tests.
lists test categories that are especially useful to