Install A Fan Tray (Hot-Swap) - Fujitsu SPARC Enterprise T5440 Service Manual

▼ Install a Fan Tray (Hot-Swap)

1. Slide the fan tray into its bay until it locks into place.
Ensure that the fan tray is oriented correctly. Airflow in the system is from front to
back.
2. Verify proper fan tray operation.
See
Next Steps
If you are replacing a faulty fan tray due to an overtemperature condition, monitor
the system to ensure proper cooling.
"Slide the Server Into the Rack" on page 155
■
If you performed any additional service procedures, see
■
page
86 SPARC Enterprise T5440 Server Service Manual • June 2011
"Fan Tray Fault LED" on page
157.
89.
"Power On the Server" on