Offset Documents By Job; Offset One Page Documents - Kyocera TASKalfa 3501i Operation Manual

Hide thumbs Also See for TASKalfa 3501i:

Table of Contents

Setup and Registration (System Menu) > System Menu

Manual Staple

Common Settings

Only displayed when the optional 4,000-sheet finisher is installed.

Manual Staple

Staple Position

Offset Documents by Job

Common Settings

Offset Documents by Job

Common Settings

Offset One Page Documents

Select whether to use Manual Staple.

Value: Off, On

If you selected [On], set the time until manual stapling mode is automatically cancelled. The

setting range is 5 to 60 seconds (in 5-second increments).

Set the default Staple Position.

Value: A4 Long Edge, Letter Long Edge

Select whether to offset documents by Job.

Value: Off, On

This function is displayed when an optional 1,000-sheet finisher or 4,000-sheet finisher is

Set whether one-page documents are sorted.

Value: Off, On

This function is displayed when an optional 1,000-sheet finisher or 4,000-sheet finisher is

Taskalfa 4501i Taskalfa 5501i