Compaq ProLiant DL380 - G2 Server Setup And Installation Manual page 94

3. Attach the cable management arm to the rack:
a. Align the unattached end of the cable management arm on the
outside of the rear brace of the rack.
b. Insert the hook into the rack hole
c. Press down to seat the arm in the rack
d. Fasten the thumbscrew through the rack hole into the rear of the
standard rail

2
1
3
Figure 4-13. Attaching the cable management arm to the rear brace of the
rack
.


.
Installing the Server 4-13
.