Removing The Air Baffle; Installing The Air Baffle - Compaq ProLiant DL380 - G2 Server Setup And Installation Manual
Compaq proliant dl380 generation 2 setup and installation guide
Hide thumbs
Also See for ProLiant DL380 - G2 Server:
- Setup and installation manual (186 pages) ,
- Quick install manual (108 pages) ,
- Deployment manual (49 pages)
Table of Contents
Advertisement
Removing the Air Baffle
A plastic air baffle directs airflow within the chassis. To perform some
hardware procedures, you need to remove the air baffle.
To remove the air baffle:
1. Remove the access panel. See the "Removing the Access Panel" section
in this chapter.
2. Lift the air baffle.
Figure 3-7. Removing the air baffle
Installing the Air Baffle
To install the air baffle:
1. Align the air baffle with the processor sockets.
2. Set the air baffle onto the system board.
CAUTION: Always install the air baffle after completing hardware installation or
maintenance procedures. Failure to do so results in improper airflow, which
could lead to thermal damage.
Installing Hardware Options 3-9
Hide quick links:
Advertisement
Table of Contents
