3-14 Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide
7. Remove the heatsink
CAUTION: Discard the heatsink after you remove it from the processor. The
heatsink is for one-time use only; after use, the thermal interface material is
degraded and does not provide proper thermal dissipation.
8. Lift the locking lever on the processor socket
9. Remove the processor
1
2
Figure 3-12. Removing the heatsink and processor
CAUTION: Processor socket 1 must be populated with a processor at all times.
The system fails to boot, halts during the POST, and does not function properly if
the socket is not populated.
10. Install the new processor. See the "Installing a Processor" section in this
chapter.
.
.
3
.