Table 8-3
PCI Hot Plug LED Status Combinations
LED
Power Status
Off
Green
On
Amber
Off
Green
Off
Amber
continued
OK to Open
Slot Status
No
Power to this slot is turned off, but this slot
needs ATTENTION. There may be a problem
with the slot, expansion board, or driver.
Follow these steps:
1.
Open the slot release lever (the amber
LED turns off).
2.
Remove, replace, or install the expansion
board.
3.
Connect the cables to the expansion
board.
4.
Close the slot release lever.
5.
Return power to the slot through the PCI
Hot Plug application or by pressing the
PCI Hot Plug button (the green LED turns
on).
Yes
The power to the slot is off. If you need to add
the expansion board in this slot, follow these
steps:
1.
Open the slot release lever.
2.
Install the expansion board.
3.
Connect the cables to the expansion
board.
4.
Close the slot release lever.
5.
Return power to the slot through the PCI
Hot Plug application or by pressing the
PCI Hot Plug button (the green LED turns
on).
PCI Hot Plug Technology 8-7