Compaq ProLiant DL380 - G2 Server Setup And Installation Manual page 156

Viewing Slot Detail Information
To view slot detail information:
1. From the Main menu, highlight the slot and expansion board
information to be viewed.
2. Press the Enter key.
3. Select Slot Detail Information from the Slot Options menu.
Removing an Expansion Board
To remove an expansion board:
1. From the Main menu, highlight the slot and expansion board to be
removed.
2. Press the Enter key to go to the Slot Options menu.
3. Use the arrow keys to highlight Remove Adapter and press the Enter
key. NCMCON then processes the remove request.
4. Verify the slot has a status of POWERED off and the green LED is no
longer illuminated.
5. Open the slot release lever.
6. Remove the expansion board from the slot. NCMCON updates the
status of the slot.
Replacing an Expansion Board
To replace an expansion board:
1. Remove the expansion board from the slot. See the "Removing an
Expansion Board" section in this chapter.
2. Verify the slot has a status of POWERED off and the green LED is not
illuminated.
3. Install the new expansion board in the slot.
4. Close the slot release lever.
PCI Hot Plug Technology 8-15