Compaq ProLiant DL380 - G2 Server Setup And Installation Manual page 157

8-16 Compaq ProLiant DL380 Generation 2 Server Setup and Installation Guide
5. When the new expansion board is detected, NCMCON automatically
asks if you want to configure and apply power to the slot.
G
If you answer "Yes," power is applied to the slot, the green LED
illuminates, and the status of the slot on the console changes to
READY.
G
If you answer "No," the console status does not change.
6. Press the Enter key to go to the Slot Options menu.
7. Use the arrow keys to highlight Replace Adapter and press the Enter
key. NCMCON processes the replace request.
Adding an Expansion Board
To add an expansion board:
1. From the Main menu, highlight the slot into which the expansion board
is to be added.
2. Press the Enter key to go to the Slot Options menu.
3. Use the arrow keys to highlight Remove Adapter and press the Enter
key. NCMCON then processes the remove request.
4. Verify the slot has a status of POWERED off and the green LED is no
longer lit.
5. Install the new expansion board in the slot.
6. Close the slot release lever.
7. When the new expansion board is detected, NCMCON automatically
asks if you want to configure and apply power to the slot.
G
If you answer "Yes," power is applied to the slot, the green LED
illuminates, and the status of the slot on the console changes to
READY.
G
If you answer "No," the console status does not change.
8. Press the Enter key to go to the Slot Options menu.