Square Ilm Design Concept; Square Ilm Assembly Design Overview; Square Ilm Part Terminology; Square Ilm Assembly - Intel BX80619I73820 Design Manual

4.1

Square ILM Design Concept

The square ILM consists of two assemblies that will be procured as a set from the
enabled vendors. These two components are the ILM assembly and back plate.
4.1.1

Square ILM Assembly Design Overview

Figure 4-1.

Square ILM Part Terminology

The ILM assembly consists of five major pieces as shown in
hinge lever, active lever, load plate, load frame, ILM cover and the captive fasteners.
For clarity, the ILM cover is not shown in this view.
Note: The ILM assembly also contains an ILM cover as described in
Figure 4-2.

Square ILM Assembly

Note: For clarity, the ILM cover is not shown in
28
Captive Nut
(4X) (4X)
Hinge Clevis
Heat Sink stud
(4X) (4X)
Frame
Active lever arm
Independent Loading Mechanism (ILM)
Loadplate Loadplate
Hinge Lever Hinge Lever
Figure 4-1
Section
4 point load plate
(fingers)
Hinge lever arm
Figure 4-2.
Thermal/Mechanical Specifications and Design Guide
Active Lever
Clevis Rivet C
(4X)
Active Clevis
Frame Insulator
and Figure 4-2,
4.5.
ILM frame