Ilm Cover; Pin 1 Markings On The Ilm Frame; Closing Ilm And Loadplate - Intel BX80619I73820 Design Manual

Figure 4-12. Pin 1 Markings on the ILM Frame
Figure 4-13. Closing ILM and Loadplate
Note: Figure 4-13
1. Carefully lower the ILM load plate on top of the processor,
2. Verify that Load-lever-cam is over the load-plate-tab; actuate Load lever with a
smooth uniform motion and latch to the ILM (with thumb).
3. Close the Hinge lever with a smooth uniform motion and latch to the ILM.
4.5

ILM Cover

Intel has developed a cover that will snap on to the ILM for the LGA2011 socket family.
The ILM cover is intended to reduce the potential for socket contact damage from the
operator / customer fingers being close to the socket contacts to remove or install the
pick and place cover. By design the ILM cover and pick and place covers can not be
installed simultaneously.
The ILM cover concept is shown in
This cover is intended to be used in place of the pick and place cover once the ILM is
assembled to the board. The ILM will be offered with the ILM cover pre assembled as
well as a discrete part.
36
is for or illustration only and may not show most current parts.
Figure
Independent Loading Mechanism (ILM)
4-14.
Thermal/Mechanical Specifications and Design Guide