Dell QLogic Family of Adapters User Manual page 85

User Diagnostics for Windows NIC Driver Management Applications: QLogic QME8242 Mezzanine Card User's Guide
4. Under Diagnostic Tests, select one or more check boxes indicating the tests you want to run: Hardware Test,
Register Test, Interrupt Test, Loopback Test, and Link Test.
each test type.)
5. Click Run Tests.
NOTE: Only one test can run at a time. Multiple tests can run sequentially.
To run user diagnostics in the CLI:
Use QConvergeConsole CLI (qaucli), a unified command line utility, to manage all QLogic adapter models, including running
user diagnostics. The overall option (-pr <protocol>) allows you to start the utility with a specific protocol type, either NIC,
iSCSI, or Fibre Channel. If you do not specify a protocol, all protocols are enabled by default.
QConvergeConsole commands for selecting a protocol.
Table 1. Windows QConvergeConsole CLI—Selecting a Protocol in Menu Mode
Command
qaucli
qaucli -pr nic [options]
qaucli -pr iscsi [options]
qaucli -pr fc [options]
qaucli -npar [options]
Table 2. Windows QConvergeConsole CLI—Selecting a Protocol in Legacy Mode
Command
file:///T|/htdocs/NETWORK/QLogic/71922/en/diag_win.htm[9/26/2012 4:26:06 PM]
Description
Start QConvergeConsole CLI in interactive mode
Issue NIC command line options
Issue iSCSI command line options
Issue Fibre Channel and FCoE command line options
Issue NPAR command line options
Description
(Windows Diagnostic Test Descriptions
Table 1
describes
and Table 2 list the