Interface Specifications; Environmental Specifications - Dell QLogic Family of Adapters User Manual

Specifications: QLogic QME8242 Mezzanine Card User's Guide
Second Generation FC Generic Services (FC-GS-2)
Third Generation FC Generic Services (FC-GS-3)

Interface Specifications

Table 3. Interface Specifications
Port Type
10G-BASE-KR

Environmental Specifications

Table 4. Environmental Specifications
Condition
Temperature Ranges (for Altitude ≤900 m or
2952.75 ft)
Temperature Ranges (for Altitude >900 m or
2952.75 ft)
Temperature Gradient Maximum per 60 Min.
Humidity Percent Ranges—Noncondensing
Humidity Gradient Maximum per 60 Min.
Altitude Ranges—Low Limits
Altitude Ranges—High Limits
Airborne Contaminants—ISA-71 Level
Table Notes:
1
Use the following formulas to calculate the maximum operating temperature (in °C) for a specific altitude. Use the first
formula if the altitude is stated in meters and the second formula if the altitude is stated in feet.
2
Use the following formulas to calculate the maximum operating temperature (in °F) for a specific altitude. Use the first
formula if the altitude is stated in meters and the second formula if the altitude is stated in feet.
3
Maximum corrosive contaminant levels measured at ≤50% relative humidity; see Table 3 in ISA-71.04-1985.
Please read all restrictions and
Back to Contents Page
file:///T|/htdocs/NETWORK/QLogic/71922/en/specs.htm[9/26/2012 4:25:26 PM]
Media
Dell PE M1000e KR Midplane Revision 1.1
disclaimers.
Operating
10 °C to 35 °C
(50 to 95 °F)
1
10 °C to Note °C
2
(50 °C to Note °F)
10 °C
20 % to 80 %*
(Max Wet bulb temperature= 29
3
°C)
10 %
-15.2 m (-50 ft)
3,048 m (10,000 ft)
3
G1
Non-Operating
-40 °C to 65 °C
(-40 °C to 149 °F)
-40 °C to 65 °C
(-40 °C to 149 °F)
20 °C
5 % to 95 %+
(Max Wet bulb temperature= 38
3
°C)
10 %
-15.2 m (-50 ft)
10,668 m (35,000 ft)
3
G1