Dell QLogic Family of Adapters User Manual page 74

Windows Teaming: QLogic QME8242 Mezzanine Card User's Guide
To remove an adapter from a team:
NOTE: A team must include at least one QLogic adapter. A QLogic adapter is allowed to be deleted from a team only if
it is not the last QLogic teamed adapter.
1. On the Team Management property page, right-click the adapter to be removed from the team.
2. On the shortcut menu, click Remove from Team.
At least two adapters must be present in a team. If an adapter is no longer required to be a member of a team, it can be
removed from the team.
To change a team property:
For the VLAN and teaming solution to work correctly, the properties of all teamed adapters and adapters with multiple VLANs
must remain synchronized with the team properties. Ensure that you change the properties of a team and an adapter with
VLANs only on the Team Management page.
1. On the Team Management page, in the right pane under Team Data, expand the Properties list.
2. Double-click the team property you need to change.
3. In the Advanced Team Properties dialog box (see
Figure 11. Modifying Advanced Team Properties
file:///T|/htdocs/NETWORK/QLogic/71922/en/teaming.htm[9/26/2012 4:25:57 PM]
Figure 11), specify a new property Value, and then click OK.