Dell QLogic Family of Adapters User Manual page 49

Configuring iSCSI Offload with QConvergeConsole: QLogic QME8242 Mezzanine Card User's Guide
$qaucli -pr iscsi -nh HBA_ALIAS "AccountingHBA"
Or:
$qaucli -iscsi - nh HBA_ALIAS
HBA (adapter) Parameters:
The following table lists the parameters that may be configured using the -nh option in non-interactive
mode.
Full Parameter Name
-------------------
HBA_Alias
Port-Level iSCSI Parameters
This section shows the commands used to display and to modify port-level iSCSI parameters.
Displaying Port-Level iSCSI Parameters
Use the -c command to view port configured settings. The positional parameter, [hba_port_inst], is optional. If the
hba_port_inst is specified, only information for that port is shown. If the hba_port_inst is not specified, information on all
ports in the system is shown.
Example:
$qaucli -pr iscsi -c 0
Or:
$qaucli -iscsi -c 0
*******************************
*** Displaying Port inst=0 ***
*******************************
*** Displaying HBA (Adapter) Level Information inst=0 ***
HBA_Alias
HBA_TCP_Max_Window_Size
HBA_Default_Fragment_Reass_Timeout
HBA_Reserved_TCP_Config
HBA_Delayed_ACK
*** Displaying Port General Summary Information inst=0 ***
0. HBA: 0 Port: 1 HBA Port Instance: 0 HBA Model: QLE8242
HBA Serial Number: (000e1e031684)qlutil_GetP3Params1: BoardStr=QLogic QLE8242 ; BoardId=0x26;
BoardPortNum=1; PCIFunction=5; MAC_ADDR= 0: E:1E: 3:16:85
FW Version: 4.2.2 Type: Fibre
IP Address: 192.168.105.208
Alias:
iSCSI Name: iqn.2000-04.com.qlogic:isp8214.000e1e031685.5
User Defined IP Address.
IPv4 Address
Gateway
Subnet Mask
IPv6 Protocol is currently disabled.
iSNS
*** Displaying ISCSI Settings inst=0 ***
Force_Negotiate_Main_iSCSI_Keys
iSCSI_Send_Markers
iSCSI_Header_Digests
iSCSI_Data_Digests
iSCSI_Immediate_Data
iSCSI_Initial_R2T
iSCSI_Data_Seq_In_Order
iSCSI_Data_PDU_In_Order
iSCSI_CHAP_Auth
iSCSI_Bidi_CHAP_Auth
iSCSI_Snack
iSCSI_Discovery_Logout
iSCSI_Strict_Login
iSCSI_Error_Recovery_Level
iSCSI_Alias
*** Displaying Firmware Settings inst=0 ***
FW_Marker
FW_Stat_Alarm
FW_Accept_AEN
FW_Access_Control
FW_Session_Mode
FW_Initiator_Mode
FW_Target_Mode
FW_Fast_Posting
FW_Sense_Buffer_Desc
FW_ZIO_Enable_Mode
AFW_Device_Timeouts
AFW_Delayed_Ack
AFW_AutoConnect
*** Displaying Device Settings inst=0 ***
Large_Frames
file:///T|/htdocs/NETWORK/QLogic/71922/en/ioffload.htm[9/26/2012 4:25:41 PM]
"AccountingHBA"
Alias Name
----------
HBAALIAS
: QLogic QLE8242
: 19537
: 0
: 0x00000000
: off
: 192.168.105.208
: 192.168.105.178
: 255.255.255.0
: Disabled.
: off
: off(*)
: off
: off
: on
: off
: on(*)
: on(*)
: off(*)
: off(*)
: off
: on
: off
: 0(*)
:
: on(*)
: off(*)
: off(*)
: off(*)
: on(*)
: on(*)
: off(*)
: off(*)
: off(*)
: off
: on
: off
: on
: off
Allowable Values
----------------
Character string