Linking To A Chap Target - Dell QLogic Family of Adapters User Manual

Enabling CHAP Authentication with QConvergeConsole: QLogic QME8242 Mezzanine Card User's Guide
-dspchap <hba_port_inst>
In the following examples, the HBA port instance = 0.
$qaucli -pr iscsi -dspchap 0
Or:
$qaucli -iscsi -dspchap 0
CHAP TABLE
Entry: 1
Name: chapdbserver1
Secret: k9Q038iaZwlqPplq012
4. Add a persistent Send Target to discover, and log in with dynamic entries to discovered targets, by issuing the –pa
command. The –pa command adds a persistent target. The positional parameters are <hba_port_inst> and <ip
address>. The optional parameters are [-PORT port_num] and [-INAME name]. If the optional port number is not
specified, it defaults to 3260. If the optional iname (iSCSI name) is not specified, it defaults to an empty string.
Command line options:
-pa <hba_port_inst> <ip address> [-PORT port_num] [-INAME name]
Example:
In the following examples, the HBA port instance = 0 and the Send Target IP = 10.14.64.154.
$qaucli -pr iscsi -pa 0 10.14.64.154
Or:
$qaucli -iscsi -pa 0 10.14.64.154
5. To display a persistent Send Target entry, issue the -ps command (you should initially expect a failed connection
because the target is not yet linked to CHAP). The –ps command lists persistent (bound) targets. The positional
parameter is [hba_port_inst [target_id]]. If no target_id is specified, all targets for the specified hba_port_inst are
shown. If neither the hba_port_inst nor target_id are specified, all target_ids for all adapters in the system are shown.
Command line options:
-ps <hba_port_inst> [target_id]
Example:
In the following examples, the HBA port instance = 0 and the Send Target IP = 10.14.64.154.
$qaucli -pr iscsi
Or:
$qaucli -iscsi
Target ID: 2
ISCSI Name:
Alias:
State: Session Failed
6. Link the CHAP entry to the target by issuing the -linkchap command. The positional parameters are <hba_port_inst>,
<chap_no> and <target_id>. The adapter is not reset after this command is issued.
Command line options:
-linkchap <hba_port_inst> <chap_no> <target_id> [<TGTBCA> <value>]
Example:
In the following examples, the HBA port instance = 0, the CHAP number = 1, and the Target ID = 2.
$qaucli -pr iscsi -linkchap 0 1 2
Or:
$qaucli -iscsi -linkchap 0 1 2

Linking to a CHAP Target

file:///T|/htdocs/NETWORK/QLogic/71922/en/chapauth.htm[9/26/2012 4:25:45 PM]
-ps 0
-ps 0
hba_no: 0 IP: 10.14.64.154 Port: 3260 TGT Instance #: 2