Labels - Epson Stylus COLOR 3000 User Manual

Labels

When printing on labels, please note the following:
Do not use labels that are curled or folded. Also avoid
using labels that are peeling off the backing.
Return unused labels to their original packages.
Unfavorable storage conditions such as high temperature,
humidity, or direct sunlight can damage them.
If your labels jam or don't feed properly, see Chapter 8,
"Troubleshooting."
For single-sheet labels:
Load sheets of labels into the manual feed slot one sheet
at a time. Otherwise, they may not feed properly. See
"Loading paper manually" on page 5-6. Also, see
Appendix D for specifications.
Only use labels that completely cover the backing sheet;
otherwise, they may peel off and jam the printer.
Make sure that the printable surface of the labels is face up.
For continuous labels:
Choose labels mounted on a continuous backing sheet with
sprocket holes for use with the tractor feeder.
Make sure the printing stays entirely within the printable
area. See Appendix D for specifications.
Make sure you load labels with the printable surface face up.
Make sure the auto tear-off feature is set to off in the
default-setting mode when using continuous labels.
Paper Handling
5
5-29