Epson Stylus COLOR 3000 User Manual page 161

Language
English
French
German
Italian
Spanish
Portuguese
N O
= On, = Off,
After you press the Pause button, the printer prints the
current default settings and the next instructions in the
language you selected. The printed instructions include
submenu tables that list all of the settings you can change
and show you how the control panel lights appear for each
selection. Use the instruction sheets to change the settings
from the control panel.
4. After making your changes, exit the default-setting mode
by turning off the printer.
Note:
You may exit the default-setting mode at any time by turning off
the printer while the printer is paused. Any changes you have
made remain in effect until you change them again.
If you want to check the new default settings, enter the
default-setting mode again and print the current settings. If
you want to stop printing the instruction sheets and exit the
default-setting mode without making any changes, press the
Pause button. Next, press the Load/Eject button to eject
the current page, if necessary, and then turn off the printer.
Ink Out
O
N
F
O
N
F
F
= Flashing
Ink Out Magenta
O
O
O
N
N
N
The Control Panel
6
6-11