Energy Star Compliance - Epson Stylus COLOR 3000 User Manual

Once you install an ink cartridge, do not open the clamp or
remove the cartridge except to replace it with a new one.
The cartridge may become unusable otherwise.
Install the ink cartridge immediately after you remove it
from its package. Leaving the cartridge unpacked for a long
time before use may result in reduced print quality.
Do not use an ink cartridge beyond the date printed on the
cartridge carton. For best results, use up the ink cartridges
within six months of installing them.
Always turn the printer off using the
Pause light flashes until the print heads are capped, which
means they are in the home (far right) position. Do not
unplug the printer or turn off the power to the outlet until
the Pause light stops flashing and the
Before transporting the printer, make sure the print heads
are capped in the home position and the ink cartridges are
in place.
E
NERGY
As an
determined that this product meets the
S
TAR guidelines for energy efficiency.
The International
is a voluntary partnership with the computer and office
equipment industry to promote the introduction of
energy-efficient personal computers, monitors, printers, fax
machines, and copiers in an effort to reduce air pollution
caused by power generation.
S
TAR Compliance
E S
NERGY TAR Partner, EPSON has
E S
NERGY TAR Office Equipment Program
2
Operate button. The
2
Operate light is off.
E
NERGY
Safety Instructions
3