Epson Stylus COLOR 3000 User Manual page 42

5. Make sure your printer model name is displayed on the
screen. Then click the Driver from disk provided by
hardware manufacturer button. Do not select any of the
other buttons.
6. Click OK. You see the Install From Disk screen.
7. Insert the printer software CD shipped with your printer in
the CD-ROM drive. Depending on the country, the
CD-ROM may contain multiple-language versions of the
printer software.
First try typing D:\Windows and clicking OK. If an error
message does not appear, proceed to step 8. If an error
message does appear, you have the multiple-language
version and you need to click OK to return to the Install
From Disk screen. Type D:\ then specify your preferred
language by typing English, Francais, German, Italian,
Portugal, or Spanish, followed by \Windows. Click OK.
(If your CD-ROM drive uses a drive letter other than "D",
substitute the appropriate letter.)
If you use the floppy disk version, insert it in a disk drive. If
the drive you are installing from is displayed on the screen,
click OK. Otherwise, change the drive letter in the Copy
manufacturer's files from box and click OK.
8. At the next screen you can type a unique name for the printer
in the Printer name box. We recommend that you keep the
model name as shown. The program will copy the files to
your hard disk and add an icon to the Printers folder using
the printer name you assign. To use this printer as the
default printer for Windows 95 applications, select Yes. (No
is the default setting.)
9. Click the Finish button.
The printer software that controls your printer is now installed.
For information on accessing and using the software, see
Chapter 3, "Printing With Windows."
2-16
Getting Started