Epson Stylus COLOR 3000 User Manual page 129

8. Make sure the left sprocket unit is as far to the right as it
will go. This places the left perforation at the left edge of
the printable area. Then lower the sprocket-lock lever to
lock the left sprocket unit.
9. Slide the right sprocket unit to remove any slack in the paper.
Then lower the sprocket-lock lever into place.
10. Reattach the manual feed guide and banner paper cover to
the printer. Match the holes of the guide to the pins on both
sides of the printer and push until they click into place.
Paper Handling
5
5-13